Lighting protection of historic buildings: what you need to know
Contents
1. Where does lighting protection start?
Lightning protection of historical buildings is essential. This is very important for protecting and preserving the heritage of a period of property. Nevertheless, historical buildings are not locations where lightning protection is a key priority, so it is vital that the appearance of the system does not appear out of date or intrusive. The materials used must do reliable work without affecting the historical appearance of the building. The installation of lightning rods for any historic building requires qualified lightning rod suppliers who understand the importance of the nature of the building and install lighting protection systems in a sympathetic manner. With this in mind, we discussed with you in this article the lightning protection measures for historical buildings that are relevant to what you need to know. Read on to learn more!
Where does lighting protection start?
Sunlight recommends that all churches, tall or prominent historical buildings should adopt lightning protection measures. However, no specific system can provide comprehensive protection, and the importance of buildings needs to be balanced with the acceptable amount of protection. This guide provides advice on the design, installation and maintenance of lightning protection systems for architects, surveyors, engineers and others involved in the protection and protection of historical buildings or properties of the era. Lightning protection is a professional work that requires high-quality lightning rod design and professional lightning rod suppliers for installation.
Lighting conductor
8 mm round copper conductors are often used in historical buildings. This can be wrapped in colored PVC so that it does not look inappropriate around the building. The purpose is to make the lightning rod appear to be part of the building, not to contrast with it. It is also important to place the conductor in place to reduce visual impact. It is possible to install the lighting protection system in a sympathetic manner, subject to compliance with relevant safety standards. By placing the conductor in an invisible place behind the buttress, a complete system can be constructed, leaving the beautiful appearance of the building intact. The air-termination device can be hidden behind the retaining wall, the down conductor can be placed behind the minaret, and they should be placed according to the lines of the building. They do not need to trim every contour or crack of the stone on the rubble or bituminous surface stonework, as this may make the aesthetic effect poor. The main feature of the building can cover the visual effect of the conductor. In addition, masking a powerful feature on a tower or spire by following the stone corner is effective, because the eyes tend to focus on the more prominent feature without realizing that a conductor is placed next to it. The installation of lightning rods on any historic building requires qualified lightning rod suppliers who understand the importance of the nature of the building and install lightning protection measures correctly.
Lighting device
The steeples and towers of historic churches and other high-rise buildings are often the target of lightning strikes. Although lightning protection is not a legal requirement, insurance companies may require churches and famous historical buildings to have lightning rods and surge protection installed by lightning rod suppliers. The following information provides suggestions for designing new or improved lightning protection and lighting protection systems: Lightning damage and thunderstorms and lightning often occur in warm and humid weather. In England, thunderstorms may occur in the East Midlands and the Southeast. Climate change research shows that the number and intensity of thunderstorms in the British Isles are more likely to increase this century. More importantly, lightning strikes are more likely to become common in the future. Lightning is a very large current discharge. It may occur between or within highly charged clouds, or from cloud to earth. These discharges can range from approximately 10 million to 100 million volts. Lightning strikes the ground usually to find the path of least resistance. This will be the highest point in the landscape, such as mountain tops, trees, spires, or towers. Since many historic churches and similar buildings have spires and towers, they are usually susceptible to lightning strikes, although this is where the unpredictable lightning actually strikes. If emissions are not controlled or lightning protection measures are not taken safely, the structure and its contents will be at risk.
At Sunlight, as a qualified lightning rod supplier, we have been installing lightning rods and maintaining lighting protection systems in commercial, historical and church buildings. You may not realize it, but many companies require their buildings to be protected from lightning strikes. You may not necessarily need to install a lightning protection system, but it is definitely worth contacting our professionals to conduct a thorough risk assessment and take effective lightning protection measures. This is because lightning strikes may cause equipment damage, power surges and system failures, which may cause Injuries and business shutdown. To learn more, please get in touch with us or visit our website.
Tags: lighting protection, lightning rod, lightning rod supplier, lightning protection measures
Related Recommendations
Use fuel tank lightning protection system to combat fire risk
Instructions for use of resistance reducer
Copper-clad steel ground rod manufacturing process requirements and application scope
