Installation process of decorative films
The installation process of decorative films is very professional, with professionally trained installers who use professional tools, are using X-100 installation potion and special cleaning supplies to ensure the longevity of the decorative film. The installation process all uses pure water, no point of alkali and salt components exist, to achieve no bubbles, no particles, smooth and neat.
1. Check whether the construction site is suitable for construction, the actual measurement of the area requires true and accurate, accurate to the centimeter.
2. Determine the type of decorative film required by the customer and cut the film precisely.
3. Construction site processing: neat and tidy work clothes, wear good shoe covers before entering the room, check whether the glass and other items are intact.
4. Site protection: Customer items are handled, protected, shifted and photographed before film application to facilitate homing after construction is completed.
5. Dust removal: generally take water mist falling dust removal (kettle tuned to fog, spray to water mist landing in front of the film room or film window) to reduce the impact of dust on the film.
6. Glass cleaning: check whether the glass window is intact, broken, missing, raised, dented, scratched and solid degree, and do the corresponding treatment.
Check again whether the glass pressure bar, glass adhesive is intact, whether there is shedding, and the impact of good or bad quality on the film, and do the corresponding treatment
1. Clean the glass, the glass pressure bar and the glass frame to no mud, no dust, no impurities.
2. Open film, film, positioning, film: this step must be used by professional technicians with professional tools for film, otherwise it is easy to have problems.
3. scrape water, cutting edge: first with a soft scraper to drain 80% of the water to ensure that the film will not run on its own. Then use a fine scraper to drain the water once, requiring uniformity without omission. In order to avoid uneven force diaphragm two produce anti-absorbent or produce bubbles, blisters. Finally, use the film cutter to cut the edge of the glass, so that the film completely and glass coincide.
4.Inspection: check the film applied and deal with various problems in time; sort out the garbage on site and restore the construction environment; check and organize and count the tools.
5. Customer acceptance: after the film is completed, take the customer to check and accept the film. And in the film work order acceptance comments column to sign to confirm; to inform customers of the film after cleaning and maintenance methods, and show the decorative film film maintenance instructions for customers to sign to confirm.
The basic process of decorative film is as above, but different technicians or in the actual construction process will have some small differences, but the common point is definitely the drainage must be clean, the film must be bubble-free, particle-free, smooth and neat, and can not have scratches.
